JBL VRX932LAP | 12" Two-Way Powered Line Array Loudspeaker System

by JBL

The VRX932LAP is a powered, lightweight, compact 12" two-way line-array speaker system designed for use in arrays of up to five units. VRX932LAP is the ideal choice when line-array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line-arrays and a fast and easy setup is vital

  • Built-in JBL DrivePack® DPC-2 amplifier module designed by Crown
  • JBL’s exclusive neodymium magnet Differential Drive® woofer
  • 3 x 2408J Annular Ring Diaphragm HF drivers
  • Constant Curvature waveguide
  • Integral rigging hardware
  • Array Configuration Selector
  • Durable construction


Power Rating: 1750 Watts Peak ; 875 Watts Continuous
Frequency Range: 57 Hz - 20 kHz (-10 dB)
Frequency Response: 75 Hz – 20 kHz (+/-3db)
Maximum Peak Output: 136 dB SPL at 1m
Coverage Pattern: 100° x 15° nominal
DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance): LF - 750 Watts, HF - 125 Watts
DPC-2 Output Section: LF - Dual-Bridged Technology™, Class D
Audio Input Connector: XLR with loop through
LF Driver: 1 x JBL 2262FF 305 mm (12 in) neodymium magnet
HF Driver: 3 x JBL 2408J, 38 mm (1.5 in)
User Controls: Input Attenuator (0-16 dB)
Signal Processing: DSP based, resident in Input Module
AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60 Hz
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)
AC Current Requirements: 6A per system at 120V, 3A per system at 240V
Optional Accessories: VRX-AF


Height: 13.75 in (349 mm)
Width: 23.5 in (597 mm)
Depth: 17.5 in (444 mm)
Weight: 52 lb (24 kg)


Enclosure: 25/15 mm, 11-ply birch plywood
Suspension / Mounting: Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting
Finish: Black DuraFlex™ finish
Grille: Powder coated, black, 16-gauge perforated steel with with acoustically transparent foam